|
|
Title |
Author(s) |
Year |
Journal |
Vol. No. |
Page |
|
77 |
Effects of Temperature
Difference and Interlayer Thickness on the Thermal Fatigue
Life of S45C/Cu/Si3N4 Composites
S45C/Cu/Si3N4接合体の熱疲労寿命に及ぼす温度範囲および中間層厚さの影響 |
N.Settsu,
M. Matsushita, M. Takahashi,
K.Mizui, N. Okabe |
2013 |
Materials system (in Japanese) |
31 |
43-50 |
|
76 |
Synthesis of super-tough nano-polycrystalline stishovite |
N.Nishiyama, S.Seike, T.Irifune, M.Matsushita,
M.Takahashi, H.Ohfuji, Y.Kono |
2012 |
Scripta Materialia |
67-12 |
955-958 |
|
75 |
Investigation of Deformation Behavior of Shaft's Cross Section
Partially Enlarged and Controlled by Cyclic Bending and Axial
Compressive Loading through Metal Mold |
X. Zhu, N. Okabe, K. Ogi, M. Takahashi,
Y. Kuwahara, K. Mori and F. Ikuta, |
2012 |
the 4th International Conference on
Computational Methods |
|
CD-ROM |
|
74 |
Fatigue Strength of Shaft with Diameter Enlarged Partially by
Cyclic Bending and Axial Compressive Loading |
X.Zhu, N.Okabe, K.Ogi, M.Takahashi |
2012 |
Applied Mechanics and Materials |
217-219 |
2346-2350 |
|
73 |
Mechanical Strength
Properties of Cu/AlN Composites Exposed to Cyclic Thermal
Loadings
繰返し熱負荷を受けるCu/AlN
複合基板の機械的強度特性 |
N. Settsu, M.Takahasi, M.
Matsushita, N. Okabe |
2012 |
J. Soc. Mater. Sci. Jpn.
(in Japanese) |
61-6 |
530-536 |
|
72 |
Effects of Thermal Loading Conditions on the Mechanical
Properties of S45C/Cu/Si3N4 Composites
S45C/Cu/Si3N4複合材料の機械的特性に及ぼす熱負荷条件の影響 |
N.Settsu, M. Takahashi,
M. Matsushita, K.Ogi, M.Tsutsumi |
2012 |
J. Soc. Mater. Sci. Jpn.
(in Japanese) |
61-3 |
292-298 |
|
71 |
Influence of Brazing Filler Metal Diffusion on the Mechanical
Strength of SUS304/Cu/Si3N4 Composite |
N.Settsu,
M. Matsushita, M. Takahashi,
M.Tanimoto, H. Ohfuji |
2012 |
J. Soc. Mater. Sci. Jpn. |
61-2 |
197-202 |
|
70 |
Influence of Fillet Shape on Residual Stress in Ceramic
Substrate with Active Brazing Filler |
M. Takahashi, N. Settsu, T.
Nakata, N. Okabe |
2011 |
13th International Conference on Electronics Materials and
Packaging |
|
DVD |
|
69 |
Empirical Models for Matrix Cracking in a CFRP Cross-Ply
Laminate under Static- and Cyclic- Fatigue Loadings |
K. Ogi,
M. Takahashi, and S. Yashiro |
2011 |
Polymer Composites |
32-10 |
1652-1660 |
|
68 |
FRACTURE ANALYSIS FOR CERAMIC BALL IN BACKFLOW VALVE |
M.Takahashi,
N.Okabe, Y.Abe K.Fujiki and R.Kanbayashi |
2011 |
Fatigue & Fract.
of Eng. Mater. & Struct. |
|
Online publish |
|
67 |
Prediction of Residual Strength after Thermal Shock for
Ceramics
セラミックスのための熱衝撃後の残存強度予測 |
S.Matsuda, K.Ogi, M.Takahashi
and T.Onoue |
2011 |
Trans. Jpn. Soc.
Mech. Eng.
(in Japanese) |
A77-773 |
2601-2609 |
|
66 |
Influences of Fluid
Properties on Stress Relaxation Behaviors of a Liver
肝臓の応力緩和挙動に及ぼす流体特性の影響 |
M.Takahashi, K.Ogi and M.Matuseda |
2011 |
Materials system (in Japanese) |
29 |
47-52 |
|
65 |
Numerical and Experimental Characterization of High-Speed
Impact Damage in CFRP Unidirectional and Cross-Ply Laminates |
K.
Ogi, S. Yashiro, M. Takahashi and
A. Yoshimura |
2010 |
The proceedings of the
7th Asian-Australasian
Conference on Composite Materials |
|
DVD |
|
64 |
Effect of stress ratio on fatigue transverse cracking in a
CFRP laminate |
K.
Ogi, R. Kitahara, M. Takahashi
and S. Yashiro |
2010 |
The proceedings of the
Fifth International
Conference on Fatigue of Composites |
|
44-53 |
|
63 |
Simulation of Deformation Behavior of Shaft’s Cross Section
Partially Enlarged and Controlled by Cyclic Bending and Axial
Compressive Loading through Metal Mold |
X.
Zhu, M. Takahashi, N. Okabe, K.
Ogi, H. Ikuta, Y. Kuwahara |
2010 |
9th
World Congress on Computational Mechanics and 4th Asian
Pacific Congress on Computational Mechanics |
|
DVD |
|
62 |
Design Optimization of Rotating Shaft Type Supporter for Knee
Osteoarthritis |
Z.
Wu, Y. Motokubo, Y. Sogabe, M. Takahashi,
T. Okada, J. Yamasaki |
2010 |
9th
World Congress on Computational Mechanics and 4th Asian
Pacific Congress on Computational Mechanics |
|
DVD |
|
61 |
Fatigue limit diagrams for transverse cracking on the basis of
the probabilistic SCG model
確率的SCGモデルに基づくトランスバースクラックに対する疲労限度線図 |
K.Ogi and
M.Takahashi
|
2010 |
Journal of the Japan Society for Composite Materials
(in Japanese) |
36-4 |
129-137 |
|
62 |
Fracture Strength Distribution of Porous Ceramics under
Quasi-Static Load |
S.Matsuda and M.Takahashi |
2010 |
Engineering Fracture Mechanics |
77 |
2601-2609 |
|
60 |
Influences of Loading
Rates on Damage Behavior of a Liver Tissue
肝臓組織の損傷挙動に及ぼす負荷速度の影響 |
M.Takahashi, K.Ogi and
D.Tanaka |
2010 |
Trans. Jpn. Soc.
Mech. Eng.
(in Japanese) |
A76-765 |
625-630 |
|
59 |
Experimental characterization of high-speed
impact damage behavior in a three-dimensionally woven SiC/SiC
composite |
K.Ogi, T.Okabe,
M.Takahashi, S.Yashiro, A.Yoshimura, T.Ogasawara |
2010 |
Composites A |
41-4 |
489-498 |
|
58 |
Behavior of Fracture Strength for Ceramics/Metal Jointing
Structure due to Varying Amount of Metal Brazing Alloy |
N.Settsu, M.Takahashi,
N.Okabe, K.Ogi and X.Zhu |
2009 |
The proceedings of the 12th International Conference on
Fracture, Canada |
|
CD-ROM |
|
57 |
Improvement of fatigue life for thermoelectric module
subjected to cyclic thermal loading |
N.Settsu, M.Takahashi, K.Ogi,
T. Deguchi, N.Okabe, S. Tohi and M. Tsutsumi |
2009 |
2nd Asian Symposium on Materials and Processing
and 4th International Conference on Recent Advances in
Materials, Minerals & Environment, Malaysia |
|
CD-ROM |
|
56 |
Study on Static and Dynamic Contact Strength of Ceramic
Bearing Ball
セラミック軸受球の静・動的接触強度特性 |
M.Takahashi,
S.Kajikawa, S.Matsuda, K.Ogi and N.Okabe |
2009 |
J. Soc. Mater. Sci. Jpn.
(in Japanese) |
58-4 |
338-344 |
|
55 |
A Probabilistic static fatigue model for transverse cracking
in CFRP cross-ply laminates |
K.Ogi, S.Yashiro, M.Takahashi
and S.Ogihara |
2009 |
Composites Science and Technology |
69 |
469-476 |
|
54 |
Initiation Strength Properties of Ring Crack Caused by Sphere
Indentation in Damage Tolerance Advanced Pore-Free SiC
損傷許容性発現先進気孔型SiCの球圧子押込みによるリングクラック発生強度特性 |
S.Matsuda, M.Takahashi,
M.Matsushita, N.Okabe and H.Ohfuji |
2008 |
J. Soc. Mater. Sci. Jpn.
(in Japanese) |
57-11 |
1138-1145 |
|
53 |
Thermal Shock Fracture Properties of Damage-Tolerant Advanced
Pore-Free SiC
損傷許容発現先進無気孔型SiCの熱衝撃破壊特性
|
S.Matsuda, M.Takahashi,
T.Onoue, K.Ogi, M.Matsushita, N.Okabe and H.Ohfuji
|
2008 |
Trans. Jpn. Soc. Mech. Eng.
(in Japanese) |
A74-744 |
1156-1162 |
|
52 |
Experiment and Shape Design of Frame of New Type OA Knee
Supporter |
Z.Q.Wu, M.Takahashi,
Y.Motokubo, Y.Sogabe,T.Okada and J.Yamasaki |
2008 |
Proceedings of the SEM XIth International Congress and
Exposition on Experimental and Applied Mechanics, America |
|
CD-ROM |
|
51 |
Study for Loading Rate Dependence on Strength Properties
of Advanced Pore-Free SiC with Damage Tolerance
損傷許容性発現先進無気孔型SiCの強度特性に対する負荷速度依存性の検討 |
S.Matsuda, M.Takahashi and
N.Okabe |
2008 |
J. Soc. Mater. Sci. Jpn.
(in Japanese) |
57-3 |
292-296 |
|
50 |
Study for the Origin of Fracture of Advanced Pore-Free Silicon
Carbide with Damage Tolerance |
S. Matsuda, M.Matsushita, M.
Takahashi , H. Ohfuji and N.Okabe |
2008 |
Journal of the Ceramic Society of Japan |
116-1 |
126-129 |
|
49 |
Characterization of foreign object damage in ceramics and
ceramic matrix composites |
K.Ogi, M.Takahashi, T.Okabe,
A.Yoshimura and S.Yashiro |
2007 |
Proceedings of 10th Japan International SAMPE Symposium &
Exhibition, JISSE-10, Japan |
|
CD-ROM |
|
48 |
Effects of Loading Rate on Fracture Properties of Advanced
Pore-free SiC Dispersing Si Particles |
S.Matsuda, M.Takahashi,
M.Matsushita, H.Ohfuji and N.Okabe |
2007 |
Proceedings of the International Conference
on Advanced Technology in Experimental Mechanics '07, Japan
|
|
CD-ROM |
|
47 |
Fracture Properties for Advanced Pore-Free SiC Dispersing of
Si Particles
Si粒子分散による先進無気孔型SiCの破壊特性 |
S.Matsuda, M.Takahashi and
N.Okabe |
2007 |
Trans. Jpn. Soc. Mech. Eng.
(in Japanese) |
A73-732 |
926-933 |
|
46 |
EVALUATION AND 3D-FEM ANALYSIS FOR CONTACT STRENGTH OF CERAMIC
PLATE IN CONTACT WITH A ROUND BAR |
Y.Abe, M.Takahashi, X.Zhu,
and N.Okabe |
2007 |
Journal of Solid Mechanics and Materials Engineering, JSME
Special Issue on the Asian Symposium on Materials and
Processing 2006 |
Vol.1, No.4 |
490-497 |
|
45 |
DEVELOPMENT OF NEW DIAMETER EXPANSION PROCESSING METHOD FOR
HOLLOW SHAFT UNDER LOAD CONDITIONS COMBINED TWIST AND
COMPRESSION |
XZhu, N.Okabe K.Mori, M.Takahashi
and T.Iura
|
2006 |
Asian Symposium on Materials and Processing, Thailand |
|
49 |
|
44 |
CONTACT STRENGTH ANALYSIS FOR CERAMIC BALL IN BACKFLOW VALVE |
Y.Abe, N.Okabe, M.Takahashi,
S.Toyota and K.Fujiki |
2006 |
Asian Symposium on Materials and Processing, Thailand |
|
108 |
|
43 |
CONTACT STRENGTH ANALYSIS OF CERAMIC PLATE SUBJECTED TO
CONTACT LOAD WITH BALL OR ROUND BAR |
Y.Abe, N. Okabe, M.Takahashi
and X.Zhu |
2006 |
Asian Symposium on Materials and Processing, Thailand |
|
107 |
|
42 |
Damage behaviors of a ceramic plate due to collision of a
flying sphere
飛翔球衝突によるセラミック平板の損傷挙動 |
M.Takahashi,
K.Ogi, N.Okabe, Y.Akizuki and S.Shibazaki |
2006 |
Trans. Jpn. Soc. Mech. Eng.
(in Japanese) |
A72-724 |
2045-2049 |
|
41 |
Influences of Horizontal Force and Round-Bar Contact on
Contact Strength of Ceramics
セラミックスの接触強度に及ぼす丸棒接触および水平力の影響 |
Y.Abe, N.Okabe and M.Takahashi |
2006 |
Trans. Jpn. Soc. Mech. Eng.
(in Japanese) |
A72-724 |
2038-2044 |
|
40 |
Development of Reformative Surgery Method using Partial
Freezing for the Liver |
M.Takahashi,
S.Nomura, M.Jindai, S.Shibata, X.Zhu, Y.Watanabe, K.Kawachi
and N.Okabe |
2006 |
Trans. ASME, J. Biomech. Eng. |
Vol.128 |
862-866 |
|
39 |
Influence of a joint structure of ceramic-metal on its
residual strength
セラミックス/金属接合部品の残存接合強度に及ぼす接合構造の影響 |
X.Zhu, N.Okabe, M.Tahahashi
and M.Nakahashi |
2005 |
J. Soc. Mater. Sci. Jpn.
(in Japanese) |
54-7 |
741-747 |
|
38 |
Simulation of deformation in a soft organ with the use of a
plastic tourniquet
プラスチック製止血帯を用いた軟器官の変形シミュレーション |
K.Ogi, M.Takahashi,
Y.Watanabe, N.Okabe and T.Nakanishi |
2005 |
Materials System
(in Japanese) |
23 |
55-59 |
|
37 |
Mechanical properties of the liver under compression loading
圧縮負荷下における肝臓の機械的性質 |
M.Takahashi,
K.Ogi, D.Tanaka, T.Nakanishi, Y.Watanabe andN.Okabe |
2005 |
Trans. Jpn. Soc. Mech. Eng.
(in Japanese) |
A71-702 |
353-358 |
|
36 |
The life prediction and the reliability of the ceramic disk
for textile machinery |
M.Takahashi,
N.Okabe and M.Abe |
2004 |
Proceedings of Indo Japan Conference on Damage Tolerant Design
and Materials, INDIA |
|
94-99 |
|
35 |
Initiation strength of ring-crack caused by sphere-plate
contact of ceramics
セラミックスの球－平板接触によるリングクラック発生強度特性 |
M.Takahashi,
N.Okabe, X.Zhu and M.Matsui |
2004 |
J. Soc. Mater. Sci. Jpn.
(in Japanese) |
53-10 |
1149-1155 |
|
34 |
Contact strength and probabilistic estimation of glass
ガラスの接触強度と確率論的評価 |
M.Takahashi,
N.Okabe and N.Izumi |
2004 |
J. Soc. Mater. Sci. Jpn.
(in Japanese) |
53-2 |
175-181 |
|
33 |
The strength degradation behavior by heat cyclic loads in
packaging structures of chip parts |
X.Zhu, N.Okabe, M.Takahashi
and T.Kii |
2003 |
Proceedings of the 9th International Conference on the
Mechanical Behaviour of Materials, Switzerland |
|
CD-ROM |
|
32 |
Contact strength of ceramics in contact with spheres |
M.Takahashi,
N.Okabe and M.Matsui |
2003 |
Proceedings of the 9th International Conference on the
Mechanical Behaviour of Materials, Switzerland |
|
CD-ROM |
|
31 |
Strength estimation of ceramic/metal joints with various
interlayer thickness |
M.Takahashi,
N.Okabe, X.Zhu and K.Kagawa |
2003 |
Fatigue & Fract. of Eng. Mater. & Struct. |
26-5 |
391--398 |
|
30 |
Probabilistic strength estimation for ceramic/metal joints
with various interlayer thicknesses |
M.Takahashi,
N.Okabe, X.Zhu and K.Kagawa |
2002 |
Mater. Sci. Res. Inter. |
8-3 |
109--115 |
|
29 |
Reliability of strength and long-term life for ceramics/metal
jointing parts under neutron irradiation |
N.Okabe, X.Zhu, M.Takahashi
and M Nakahashi |
2002 |
Mater. Sci. Res. Inter. |
8-3 |
101--108 |
|
28 |
Fracture strength database and strength analysis for
ceramic/metal joints
セラミックス／金属接合部材の破壊強度データベースと強度解析
|
M.Takahashi,
N.Okabe, H.Hirata, N.Shiraki and H.Kobayashi |
2002 |
J. Soc. Mater. Sci. Jpn.
(in Japanese) |
51-1 |
61--67 |
|
27 |
Contact strength properties and its evaluation of ceramics in
contact with round bar |
M.Takahashi,
N.Okabe, X.Zhu and Y.Nishikawa |
2001 |
Proceedings of the 10th International Conference on Fracture,
America |
|
CD-ROM |
|
26 |
Mechanical damage behavior in ceramics/metal joints by neutron
irradiation |
N.Okabe, X.Zhu, M.Takahashi,
M.Tsutsumi and M.Nakahashi |
2001 |
Proceedings of the 10th International Conference on Fracture,
America |
|
CD-ROM |
|
25 |
The improvement of the performance and the reliability of the
ceramic components used for the fiber machine - The
elucidation of the fracture mechanism of the ceramic disk -
繊維機械におけるセラミック部品の強度・信頼性の向上
-セラミックディスクの破壊メカニズムの解明-
|
M.Abe, N.Okabe and M.Takahashi |
2001 |
J. Soc. Mater. Sci. Jpn.
(in Japanese) |
50-3 |
284--289 |
|
24 |
Probabilistic strength estimation against various interlayer
thicknesses in ceramic/metal joints
セラミックス／金属接合部材の中間層厚さに対する破壊確率論的強度推定
|
M.Takahashi,
N.Okabe, X.Zhu and K.Kagawa |
2001 |
J. Soc. Mater. Sci. Jpn.
(in Japanese) |
50-1 |
7--12 |
|
23 |
Applications of ceramic-metal joining technology to mechanical
and electrical components |
M.Takahashi,
N.Okabe and X.Zhu |
2000 |
The 1st ECN-EU. joint seminar 2000 |
|
CD-ROM |
|
22 |
Fracture morphology and strength properties of ceramics
subjected to collision of a small ball
異物衝突に対するセラミックス部材の破壊形態と強度特性について
|
N.Okabe, M.Takahashi,
N.Morisawa and H.Itoh |
2000 |
Trans. Jpn. Soc. Mech. Eng.
(in Japanese) |
A 66-649 |
1758--1764 |
|
21 |
Strength estimation of ceramic/metal joints with various
interlayer thickness |
M.Takahashi,
N.Okabe, X.Zhu and K.Kagawa |
2000 |
Proceedings of the 13th European Conference on Fracture,
Fracture Mechanics: Applications and Challenges, Spain |
|
CD-ROM |
|
20 |
Study on optimum thickness of interlayer in ceramic/metal
joints
セラミックス／金属接合部材の最適中間層厚さに関する検討
|
M.Takahashi,
N.Okabe, X.Zhu, K.Kagawa and H.Kobayashi |
2000 |
J. Soc. Mater. Sci. Jpn.
(in Japanese) |
49-8 |
905--911 |
|
19 |
Effects of interlayer thickness on joint strength in
ceramic/metal joints (Derivation
of interlayer thickness used fracture mechanics method)
セラミックス／金属接合強度に及ぼす中間層厚さの影響(破壊力学的手法を用いた最適中間層厚さの導出)
|
M.Takahashi,
N.Okabe, K.Kagawa and X.Zhu |
2000 |
Memoirs Fac. Eng. Ehime Univ. (愛媛大学工学部紀要)
(in Japanese) |
19 |
13--22 |
|
18 |
Residual stresses and fatigue strength properties in
ceramic/metal joints
セラミックス／金属接合材の残留応力と疲労強度特性
|
N.Okabe, M.Takahashi, X.Zhu,
K.Kagawa and M.Maruyama |
1999 |
J. Soc. Mater. Sci. Jpn.
(in Japanese) |
48-12 |
1416--1422 |
|
17 |
Probabilistic estimation of fracture strength considering
loading time in ceramics/metal joints
負荷速度依存性を考慮したセラミックス／金属接合部材強度の確率論的評価 |
M.Takahashi,
N.Okabe and H.Kobayashi |
1999 |
J. Soc. Mater. Sci. Jpn.
(in Japanese) |
48-11 |
1288--1293 |
|
16 |
Optimization of structure design for a component with
metal/ceramic joints |
N.Okabe, X.Zhu, M.Takahashi
and M.Maruyama |
1999 |
Proceedings of the Sixth Japan International SAMPE Symposium |
Vol.1 |
575--580 |
|
15 |
Residual stresses and fatigue strength in ceramic/metal joints
|
M.Takahashi,
N.Okabe, X.Zhu and M.Maruyama |
1999 |
Proceedings of the International Conference on Advanced
Technology in Experimental Mechanics '99(ATEM'99) |
Vol.2 |
733--738 |
|
14 |
The Properties of fracture strength and probabilistic
estimation in ceramic/metal joints
セラミックス／金属接合部材の破断時間強度特性と確率論的評価 |
M.Takahashi,
N.Okabe and H.Kobayashi |
1999 |
Memoirs Fac. Eng. Ehime Univ. (愛媛大学工学部紀要)
(in Japanese) |
18 |
73--82 |
|
13 |
The Properties of fracture strength and reliability estimation
in ceramic/metal joints
セラミックス／金属接合部材の破断時間強度特性と信頼性評価 |
M.Takahashi,
N.Okabe and H.Kobayashi |
1998 |
J. Soc. Mater. Sci. Jpn.
(in Japanese) |
47-12 |
1221--1226 |
|
12 |
Fracture strength properties and damage tolerance of continuos
fiber ceramic composites |
N.Okabe, M.Takahashi,
M.Hosogi, N.Tohya and T.Okamura |
1998 |
Proceedings of First Asian-Australasian Conference on
Composite Materials(ACCM-1) |
2 |
511-1--511-4 |
|
11 |
Significance of crack tip intensity factor Ktip and effect of
grain size on fatigue crack growth in alumina
アルミナの疲労き裂伝ぱにおけるき裂先端応力拡大係数Ktipの有効性と結晶粒径の影響 |
Y.Miyashita, Y.Mutoh, M.Takahashi
and K.Uematsu |
1996 |
Trans. Jpn. Soc. Mech. Eng.
(in Japanese) |
A 62-601 |
1985--1992 |
|
10 |
Effect of grain size on fatigue crack growth in silicon
nitride and alumina |
Y.Mutoh, Y.Miyashita, T.Hansson, and
M.Takahashi |
1995 |
Proceedings of an International Engineering Foundation
Conference, Plastic Deformation of Ceramics |
|
653--665 |
|
9 |
Fatigue crack growth behavior of surface cracks in silicon
nitride |
Y.Mutoh, M.Takahashi and
A.Kanagawa |
1994 |
Cyclic Deformation, Fracture and Nondestructive Evaluation of
Advanced Materials, Vol.2, ASTM STP 1184 |
|
19--31 |
|
8 |
Significance of Ktip in fatigue crack growth behavior of
silicon nitride |
Y.Mutoh and M.Takahashi |
1993 |
Proceedings of the International Conference, Advanced
Materials '93 I/A, Ceramics, Powders, Corrosion and Advanced
Processing, Trans. Mat. Res. Soc. Jpn. Vol.14A |
14A |
379--382 |
|
7 |
Fatigue crack growth in several ceramic materials |
Y.Mutoh, M.Takahashi and
M.Takeuchi |
1993 |
Fatigue & Fract. of Eng. Mater. & Struct. |
16-8 |
875--890 |
|
6 |
Mechanisms of fatigue crack growth in silicon nitride
|
Y.Mutoh and M.Takahashi |
1992 |
Proceedings of a Conference, Theoretical Concepts and
Numerical Analysis of Fatigue |
|
541--558 |
|
5 |
Static and cyclic fatigue crack growth in several ceramic
materials
数種のセラミックスの静疲労および繰返し疲労き裂伝ぱ特性 |
M.Takahashi
and Y.Mutoh |
1991 |
Trans. Jpn. Soc. Mech. Eng.
(in Japanese) |
A 57-543 |
2615--2621 |
|
4 |
Effect of surface finish on fatigue strength in silicon
nitride |
M.Takahashi,
Y.Mutoh, K.Yanagi, H.Okamoto, and T.Oikawa |
1991 |
Proceedings of the Sixth International Conference, Mechanical
Behaviour of Materials-Ⅵ |
2 |
371--376 |
|
3 |
Fracture toughness evaluation of five structural ceramic
materials by various testing methods
異なる試験法による数種の構造用セラミックスの破壊靭性評価 |
N.Miyahara, Y.Mutoh, K.Tanaka and
M.Takahashi |
1991 |
Trans. Jpn. Soc. Mech. Eng.
(in Japanese) |
A 57-538 |
1326--1333 |
|
2 |
Long and short fatigue crack growth behavior in silicon
nitride
窒化けい素における長いき裂と短いき裂の疲労き裂伝ぱ挙動 |
M.Takahashi,
Y.Mutoh, H.Okamoto and T.Oikawa |
1991 |
J. Soc. Mater. Sci. Jpn |
40-452 |
588--594 |
|
1 |
Fatigue crack growth of long and short cracks in silicon
nitride |
Y.Mutoh, M.Takahashi,
T.Oikawa and H.Okamoto |
1991 |
Proceedings of the Engineering Foundation International
Conference，Fatigue
of Advanced Materials |
|
211--225 |